SELLOCK 3290 Penetrating Thread Locker
0 Comments
SELLOCK 3290 Penetrating Thread Locker
Description:
Sellock 3290 is designed for the sealing and locking of threaded fasteners. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.
Properties
- Heat and water resistance
- Waterproof
- Low viscosity
- Particularlly suitable for uses including the filling of porosity in welds, castings and powdered metal parts.
Technical Data Sheet
| Chemical Base | Dimethylacrylate esther |
| Apperance | Liquid |
| Specific gravity( 25oC) | 1,08 g/cm³ |
| Viscosity | 20-70 cPs |
| Operating Temperature | -54 oC to 200 oC |
| Fixture Time | 10-15 mins |
Break away Torque M10 steel bolts & nuts (ISO 10964): 7 Nm
Prevail Torque M10 steel bolts & nuts (ISO 10964): 30 Nm
Colour: Not applicable
Packing: 50ml, 250ml.
This product is not recommended for use pure oxygen and/or oxygen systems and should not be used with chlorine or other strong oxidising material.
This product is not recommended for use on certain plastics.
DOWNLOAD TECHNICAL DATA SHEET
APPLICATIONS
- Surfaces should be dry, clean, and free of any contamination.
- If the material is an inactive metal, consider using an activator.
- Shake the product thoroughly before use.
- Apply several drops to the bolt and nut.
- Assemble and tighten as required.
- To prevent clogging of the nozzle, do not let the tip touch the metal surface during application.
- For disassembly, use localized heat to bolt or nut, disassemble while hot.
- To remove cured products, use a combination of solvents such as a wire brush.
B1 Fire Resistant Foam
November 6, 2024
SELLOCK 3638 Very High Retainer
November 6, 2024
