MS 40 ESSRBOND
MS 40 ESSRBOND
Description:
ESSRBOND MS 40 is a one component, high performance sealant based on advance MS Polymer Technology. It is solvent, Silicone & Isocyanates free & Nonstaining having an excellent UV, weather and temperature resistance for natural stones. It has excellent adhesion over a wide variety of substrates and is paintable with most common industrial paints.
CHARACTERISTICS
- Fast Cure
- Abrasion resistance including foot traffic
- High Strength adhesive bond
- Excellent adhesion to a wide variety of substrates
- Good primer less adhesion on many common construction substrates
- Permanently Flexible
- No Shrinkage
- Non-Staining Including Hydrophobic Staining
- Damp surface tolerant
- Low Dirt Pick up
- High UV and aggressive atmosphere resistance
- Resistance to aerobic and anaerobic bacteriological attack.
- Comprehensive color range
- Environmentally Friendly
- Excellent low temperature gun ability
- Improved gun & tooling characteristics
- Retains joints soundness once cured
| PROPERTIES | RESULTS | TEST METHODS |
| Full Cure Standard Condition | 3-4mm / 24 hr | – |
| Color | White / Black /Grey | – |
| Density[g/cc] | 1.5g/ml | ASTM D 792 |
| Skin over time | 10 – 15 min (23 C & 50% R.H) | – |
| VOC Content | <2% | ASTM D 3960 |
| Shore ‘A’ Hardness | 35 – 45 (After 7 Days | ASTM D 2240 |
| Application Temperature | 5 C to 40 C | – |
| Elongation at Breaking | >400% (Approx) | ASTM D 412 |
| Curing System | Moisture Curing | – |
| Movement Accommodation Factor ( M A F) | 25% | TT-S-0027E |
| Tensile Strength | >1.5 Mpa | ASTM D 412 |
| Maximum Joint Width | 50mm | – |
| Service Temperature | -40 C to 100 C | – |
DOWNLOAD TECHNICAL DATA SHEET
APPLICATIONS
It is specially formulated for structural joint that will be subjected to dynamic stresses. It is used for making permanent high strength elastic bonding in Construction Automotive, Industrial and Marine applications. Ideal for bonding of metal Stainless Steel, Aluminium, Steel, Copper etc.), Rubber (Natural, Synthetic, EPDM etc.), Natural Materials (Wood, Plywood, Leather, Cloths, Paperboard etc,
Inorganic (Concrete, Mortar, Natural Stone, Tile, Glass, Porcelain etc.) and Plastics (Nylon, PVC, ABS, Polycarbonate etc.)
